Fieldpiece Job Link® Charge Test Kit (Case+2xJL3PR+2xJL3PC)
SKU: JL3KR4
- Set Includes: Pipe Clamp Probes: 2 JL3PC | Pressure Probes: 2 JL3PR | Case: ANC18 | Batteries: 8 AAA
- Up to 1000’ wireless signal
- Powerful enough to go through most walk-in coolers and freezers
- Directly transmits to your mobile device
- Stabilizes in under 5 seconds
- Beeper and LED indicate accurate connection
- The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
- Narrow jaw connects in tight spaces and on irregular pipe shapes
- 45° angled fitting easily connects in tight spaces
- Pressure sensors are accurate at any elevation
- Calibrates automatically when powered on
JL3KR4 – Job Link® System Probes Charge Kit
Details
Quick system checks just got quicker.
Wireless range of 1,000’.
Directly connects to mobile device with Job Link System App Fast accurate temps with new Rapid Rail® technology Pressures auto calibrate at any elevation Great for critically charged systems A2L Compatible
Connect two pressure probes and two pipe temperature clamps to immediately see system charge on your Job Link® System mobile app. Easily determine if unit is running properly, or if troubleshooting is needed. All measurements can be sent up to 1000’ away directly your mobile device. Each tool is designed for agility and speed. The pressure probe fits into tight spaces. The pipe clamp uses a new Rapid Rail™ sensor design to deliver accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link probes!
Powerful Wireless Signal Strength
Rapid Rail Sensor Advantages
Reliable Pressures Regardless of Location
Key Features
- Set Includes: Pipe Clamp Probes: 2 JL3PC | Pressure Probes: 2 JL3PR | Case: ANC18 | Batteries: 8 AAA
- Up to 1000’ wireless signal
- Powerful enough to go through most walk-in coolers and freezers
- Directly transmits to your mobile device
- Stabilizes in under 5 seconds
- Beeper and LED indicate accurate connection
- The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don’t affect the measurement
- Narrow jaw connects in tight spaces and on irregular pipe shapes
- 45° angled fitting easily connects in tight spaces
- Pressure sensors are accurate at any elevation
- Calibrates automatically when powered on
Specifications
- Wireless Range: 1000 feet or more (305 meters)
- Wireless Frequency: 2.4 GHz
- Battery: 2x AAA (included)
- Battery Life: 150 hours typical alkaline
- Auto Power Off (APO): 2 hours (can be disabled)
- Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or Android™ 5.0
- JL3PR — Connector Type: 45° Standard 1/4” NPT female flare
- JL3PR — Best Accuracy: ±1 psig (±7 kPa)
- JL3PR — Measurement Range: 0 to 580 psig (0 to 4000 kPa)
- JL3PR — Maximum Overload: 800 psig (5500 kPa)
- JL3PC — Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
- JL3PC — Accuracy: ±1°F (±0.6°C)
- JL3PC — Measurement Range: -50°F to 257°F (-46°C to 125°C)
- JL3PC — Stabilization Time: Three seconds typical
- JL3PC — Measurement Feedback: Beeper and LED
- JL3PC — Patent: 10,365,165
Set Replacement Items
| SKU | Title | Size / OAL |
|---|---|---|
| JL3PC | 2 x JL3PC Job Link Premium Pipe Clamp Probes | — |
| JL3PR | 2 x JL3PR Job Link Pressure Probes | — |
| ANC18 | ANC18 Protective Case | — |
| — | 2 x AAA Batteries Per Probe (8 Total) | — |
Warnings
- Hand turn the female fitting to connect and disconnect. DO NOT use the plastic body to increase leverage. Doing so can cause damage, leaks, and void warranty.
- Do not apply more than 800 psig.
- The entire JL3PC may become hot when testing hot pipes or cylinders. Use caution handling.
| Brand | Fieldpiece |