3/4" Torque Wrench MANOSKOP® 714R/100 with angle measurement 100-1000 Nm / 73-735 ft-lb

SKU: 96501100 Model: 714R/100 EAN: 4018754212804

• Drive: 3/4" square
• Tool holder size (internal square): 22 x 28 mm
• Measuring range: 100-1000 N·m
• Measuring range: 73-735 ft·lb
• Measuring range: 885-8850 in·lb
• Length (L): 1438 mm
• Width (b): 130 mm
• Height (h): 100 mm
• Weight: 6905 g
• Weight with case: 12500 g

Description

An angle and torque wrench for bolted joints in accordance with the torque, angle of rotation, torque with "angle of rotation" monitoring variable and angle of rotation with "torque" monitoring variable tightening method.

Electromechanically displaying (with electronic measurement) and triggering (with the familiar mechanical “click”).

Visual evaluation of the bolted joint.

Simple documentation of the recorded measurements on the PC via the USB interface and via an optional Bluetooth Low Energy module.

Thanks to the combination of the patented electromechanical triggering and the display and acoustic feedback, the wrench provides signalling with maximum optimisation.

Properties

• eClick - electromechanical click
• Acoustic, haptic, and visual trigger signal
• With reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or ratchet insert tool with push-through square drive (sizes 80-100)
• 4 measuring modes (torque, angle of rotation, torque with ‘angle of rotation’ monitoring variable, angle of rotation with ‘torque’ monitoring variable)
• High-resolution colour OLED display and side signal lights
• Visual evaluation of the bolted joint: yellow light (pre-warning threshold reached), green light (within tolerance range), red light (measurement outside tolerance range)
• Freely configurable menu structure
• Battery cap/battery pack with bayonet connection
• Optional: Li-ion battery no. 7195-2 and charger no. 7160
• 3 function modes: clicking (patented electromechanical click), peak hold (indicating mode with peak value display) and track (indicating mode with actual value display)
• Micro USB interface for data communication
• Optional Bluetooth Low Energy module (5.2) or WLAN module
• QuickRelease safety lock - switching system for insert tools
• Data storage for up to 2,500 bolting processes, including date and time stamp
• Up to 200 bolted joints in a maximum of 25 sequence diagrams can be programmed
• Different tolerance limits can be set depending on the type of bolted joint
• Fast and precise adjustment via the keyboard
• No unintentional adjustments thanks to password-protected keypad lock
• Acoustic and visual signal warns of torque wrench overload and forced clicking in clockwise tightening mode
• Automatic indication of the next calibration date, user-configurable by time interval and/or number of joints
• Fully automatic calibration and adjustment with the perfectControl® calibration and adjustment system no. 7794-2 (torque) or 7794-3 (torque and angle of rotation)
• Units of measurement: N·m, ft·lb, in·lb
• Automatic extension length correction: option of entering a deviating extension length to ensure the required target value is achieved
• Ready for operation again immediately after release
• For a controlled tightening process. The insert tool must be turned in clicking mode
• Torque and angle of rotation displays visible at the same time
• Measurement regardless of the force application point (for sizes 1, 2, and 4)
• Safe handling due to the ergonomically shaped 2-component handle (resistant to the most common oils, greases, fuels, brake fluids, and Skydrol)
• 3 certificates included (torque indicating/clicking in accordance with DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)
• In sturdy plastic box (sizes 40-100 in steel box)
• Registered design, patented
• Supplied with SensoMaster 4 software, USB cable, 4 micro-batteries AAA/LR03, 1.5 V
• Angle of rotation display resolution 0.1°
• Angle of rotation display accuracy ±1°, ±1 digit to 100°, >100° at least 1%, ±1 digit
• Torque display resolution ≤ 60 N·m: 0.01 N·m; > 60 N·m: 0.1 N·m
• Torque display accuracy ±2%, ±1 digit