Klein USB Digital Meter, USB-A and USB-C (ET920)
SKU: ET920
- 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
- Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
- Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
- Store and recall up to 10 readings
- Voltage and current overload detection
- Hi-resolution LCD for clear visibility in environments with low ambient lighting
- Device must be used in line between source being measured and power source
- Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
- Built to withstand a 6.6-Foot (2m) drop
- No batteries needed; powered by the USB port being tested
ET920
USB Digital Meter, USB-A and USB-C
The Klein Tools ET920 is a USB digital meter for Type-A and Type-C ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can function with any USB-A and most USB-C ports, including Qualcomm Quick Charge® ports that have the ability to deliver power. It requires NO batteries as it draws power from the power source to function.
Specifications
- Elapsed Time: Up to 999 Hours, 59 Min, 59 Secs
- Capacity Used: 99,999mAh Maximum
- Current: USB-A: 0.05 to 3A; USB-C: 0.05-5A
- USB Compatibility: USB-A, USB-C; Qualcomm Quick Charge® Compatible
- Special Features: Fits Any USB-A and USB-C Ports
- Drop Protection: 2 m (6.6')
- Energy Delivered: 999Wh Maximum
- Voltage: 3 to 20V DC
- Ingress Protection: IP20
- Display: LCD
- Application: USB Port Voltage, Current, Capacity, Energy and Resistance (Calculated)
- Type: USB-A (Type A) and USB-C (Type C)
- Material: Polymer
- Resistance: 400 ohms Maximum
- Style: USB-A and USB-C Meter
- Weight: 0.11 lb
- Overall Width: 1.96 in (5 cm)
- Overall Height: 0.6 in (1.5 cm)
- Overall Length: 2.96 in (7.5 cm)
- UPC: 092644691669
Additional Information
Warnings
- To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.
- This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.
- Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.
| Brand | Klein Tools |