Kyoritsu 6516BT Digital Multifunction Tester with Bluetooth *NEW

$ 2,446.00 2446.0 USD $ 2,446.00

Brand

This combination does not exist.

Add to Cart

Kyoritsu

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Description
Specifications

MULTI FUNCTION INSTALLATION TESTER

KEW 6516BT

A lot of Testing Power in the hands of Electrical Installation Professionals!

DISPLAY
Color LCD 3.5 inches dot matrix.
ATT
Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
LOOP
・High test current range of 2Ω with 0.001Ω resolution.
・Zs Limit compares the values required by Electrical Installations Standard with measured results.
RCD
・Type AC, A, F, B(General & Selective), EV and Variable RCDs.
・Single and Auto test, Ramp test and Contact voltage.
EARTH
Earth resistance test 2 and 3 wires with all accessories included.
INSULATION
Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
CONTINUITY
Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
PHASE ROTATION
On 3-phase lines with clear indication of the sequence on the display.
VOLTS
TRMS Voltage measurements 2 to 600V, Mains Frequency.
HELP
Display shows how to connect the instrument according to the function selected.
SPD
Surge Protection Device test, for SPD that uses varistor.
PAT
Portable Appliance Tester function, for Insulation and Protective conductor resistance test
Bluetooth
Communication by "KEW CONNECT"
SAFETY
IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V, IEC 61557-1,2,3,4,5,6,7,10.

How to use ” KEW Smart Advanced App” and explaining each function.

Product Overview

Large LCD & HELP function

All the test data is shown in one large colored screen.
HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

Set the rotary dial to your testing range.
Connect the instrument to the installation under test.
Press the test button.(By remote probe or using the Lockdown function of the test button.)

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.

With 3 wire (L, N, PE), to get the best accuracy readings.

With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

Connectivity

Bluetooth

Use the application KEW Smart Advanced to improve work efficiency.

KEW 6516BT can trancfer the test data toa Tablet or Smartphone via Bluetooth.

Such test data can be saved, shared and sent by email.

Measurement Data Managemant Application "KEW Smart Advanced"

One application can manage all supported models.

Click here for more information

USB

Use the PC application KEW Report to improve work efficiency.

KEW 6516BT can download the test data by connecting the USB adaptor (Model 8212-USB for option) and then print complete Test Reports by a PC.

Specification

Insulation resistance	SPD (Varistor)
Test voltage	100V	250V	500V	1000V	Max.1000V
Measuring ranges	2.000/20.00/200.0MΩ (Auto-ranging)	20.00/200.0/ 1000MΩ (Auto-ranging)	20.00/200.0/ 2000MΩ (Auto-ranging)	0 to 1049V (goes up by 1V)
Accuracy	±2%rdg±6dgt (2.000/20.00MΩ) ±5%rdg±6dgt (200.0MΩ)	±2%rdg±6dgt (20.00/200.0MΩ) ±5%rdg±6dgt (1000MΩ)	±2%rdg±6dgt (20.00/200.0MΩ) ±5%rdg±6dgt (2000MΩ)	±5%rdg±5dgt
Rated current	1.0 to 1.2mA @0.1MΩ	1.0 to 1.2mA @0.25MΩ	1.0 to 1.2mA @0.5MΩ	1.0 to 1.2mA @1MΩ	‐
Output short circuit current	1.5mA max	‐
Loop impedance
Function	LOOP ATT	LOOP HIGH
L-PE/L-N (3wire)	L-PE (2wire)	L-PE (0.01ΩRes)	L-PE (0.001ΩRes) High test current (25A)	L-N/L-L
Rated voltage	100 to 260V (50/60Hz)	48 to 260V (50/60Hz)	48 to 260V (50/60Hz)	100 to 260V (50/60Hz)	48 to 500V (50/60Hz)
Impedance range	20.00/200.0/2000Ω (Auto-ranging)	20.00/200.0/2000Ω (Auto-ranging)	2.000Ω	20.00Ω
Accuracy	±3%rdg±6dgt	±3%rdg±10dgt	±3%rdg±4dgt	±3%rdg±25mΩ	±3%rdg±4dgt
Nominal test current at 0Ω external loop: Magnitude/ Duration at 230V	L-N:6A/60ms N-PE:10mA	L-PE:15mA	20Ω: 6A/20ms 200Ω: 0.5A/20ms 2000Ω: 15mA/500ms	25A/20ms	6A/20ms
PSC/PFC
Range	2000A/20kA (L-N(PSC)/L-PE(PFC))	2000A/20kA (PFC)	2000A/20kA (PFC)	2000A/50kA (PFC)	2000A/20kA (PSC)
Accuracy	PSC/PFC accuracy is derived from measured loop impedance specification and measured voltage specification
RCD
Rated voltage	100 to 260V(50/60Hz)
Function	x1/2, x1,x5,Ramp,Auto,Uc
6/10/30/100/300/500/1000mA/variable
RCD type	AC(G/S)	A(G/S)	F(G/S)	B(G/S)	EV
Trip current setting	x1/2, x1,Uc	10/30/100/300/ 500/1000mA(G) 10/30/100/ 300/500(S)	10/30/100/ 300/500mA	10/30/100/ 300/500mA	10/30/100/ 300mA	6mA (x1 only)
x5	10/30/100mA	10/30/100mA	10/30/100mA	10/30mA	-
Ramp	10/30/100/ 300/500mA	10/30/100/ 300/500mA	10/30/100/ 300/500mA	10/30/100/ 300mA	6mA
Accuracy	Trip current	x1/2	-8 to -2%	-10 to 0%	-10 to 0%	-10 to 0%	-
x1	+2 to +8%	0 to +10%	0 to +10%	0 to +10%	0 to +10%
x5	+2 to +8%	0 to +10%	0 to +10%	0 to +10%	-
Ramp	-4 to +4%	-10 to +10%	-10 to +10%	-10 to +10%	-10 to +10%
Trip time	x1/2	2000ms(G/S):±1%rdg±2ms	-
x1	550ms(G):±1%rdg±2ms,1000ms(S):±1%rdg±2ms	10.5s:±1%±2㎳
x5	410ms(G/S):±1%rdg±2ms	-
Continuity
Range	20.00/200.0/2000Ω (Auto-ranging)
Open circuit voltage(DC)	7 to 14V
Measuring current	200mA	200mA or more(2Ω or less)
15mA	15mA±3mA(short-circuit)
Accuracy	±2%rdg±8dgt
Volts
Range	300.0/600V(Auto-ranging)
Measuring ranges	Volts	2 to 600V
Frequency	45 to 65Hz
Accuracy	Volts	±2%rdg±4dgt
Frequency	±0.5%rdg±2dgt
Phase Rotation
Rated voltage	48 to 600V(45 to 65Hz)
Remarks	Remarks Correct phase sequence: are displayed “1.2.3” and mark Reversed phase sequence: are displayed “3.2.1” and mark
Earth
Range	20.00/200.0/2000Ω(Auto-ranging)
Accuracy	±2%rdg±0.08Ω(20.00Ω) ±2%rdg±3dgt(200.0/2000Ω)
General
Applicable standards	IEC 61010-1 CAT IV 300V / CAT III 600 V Pollution degree 2 IEC 61010-2-034, IEC 61557-1,2,3,4,5,6,7,10 IEC 60529(IP40), IEC 61326(EMC)
Communication interface	USB, Bluetooth® 5.0
Power source	LR6 (AA) (1.5V) ×8
Communication interface	USB
Dimension / Weight	136(L) × 235(W) × 114(D) mm / 1350g (including batteries)
Accessories	Mains test lead*1 7281 (Test leads with remote control switch) 7246 (Distribution board test lead) 7228A (Earth resistance test leads) 8041 (Auxiliary earth spikes[2 spikes/1 set]) 9084 (Soft case) 9142 (Carrying case) 9151 (Shoulder strap) 9199 (Shoulder pad) LR6(AA) × 8 Instruction manual Calibration certificate
Optional Accessories	8212-USB (USB adapter) 8259 (Adapter for measurement terminal) 7272 (Precision measurement cord set) 8017A (Extension prod long) 8602 (EVSE ADAPETER)

Please download “KEW Report(software)” from here.

*1　7187A:British plug, 7218A:(EU)European SCHUKO plug, 7221A:(SA)South african plug, 7222A:(AU)Australian plug

MULTI FUNCTION TESTER and EVSE ADAPTER Kits

Kits available for testing EVSE with KEW 6516 series.

KEW 6516BT-EV2
- KEW 6516BT x 1
- KEW 8602 x 1

Accessories

Optional Accessories

Catalog & Document