KL-9002 SP E Spring Compressor With Protective Insert

• Fits universally for vehicles with MacPherson suspension strut and damper strut axles, especially for all-wheel vehicles and vans as Citroën Jumper; Fiat Ducato; Mercedes Vito, V-Klasse, M-Klasse, W210 4Matic; Peugeot Boxer, Break; Renault Master etc
• The use of special jaws will also enable coil springs mounted to wishbone suspensions to be removed and installed if space conditions allow
• Including spring retainer pairs size 1 and 2 for a spring diameter of 85 mm (inside) - 170 mm (outside)
• Further spring retainers for spring diameters of 60 (inside) - 205 (outside) available
• Maximum load capacity 27 500 N (in case of the prescribed 4-fold safety, the maximum load capacity of the spring retainer is with 27 500 N!)
• The universal spring retainer,
• with which the minimum spanner size (opening width) is adjustable to 40 mm and the maximum to 361 mm due to a grid system
• This is important when tensioning very short springs (2 - 3 spring coils) and in case of very long springs, in order to completely release or renew them
• where the forged spring retainers are fixed with a bajonet lock system with automatic lock (tools, screws and screw rings are not needed)
• where the spindle drive stays closed, when the locking pin shears off
• The compressed spring can then be released via an auxiliary drive, in order to install a new locking pin
• where a spindle overload during the release process when the maximum operating stroke is reached, is prevented by an automatic free-wheel
• Important to avoid damage to the spring retainer
• with plastic protective inserts that can be screwed with the spring retainers in order to protect the spring paint surface
• Important to avoid spring fractures due to notch and corrosion effects
• which can be used on nearly all MacPherson suspension strut axles, damper strut axles and in part on some wishbone axles due to a large spring retainer assortment
• Due to the interaction of high-precision individual components and the use of wear-resistant nitriding steel, the compressor cylinder works very smoothly and nearly without any wear
• For example, tensioning of a Mercedes M-Class spring with a block force of approx. 18 000 N, only requires a driving force of 35 Nm
• Advantages:
• Simple handling regardless of large forces
• Spring retainer attachment with automatic engagement
• Adjustment of spanner sizes
• Drive with additional auxiliary drive
• Automatic free-wheel of the spindle
• Can be also used for conical springs
• Plastic protective inserts included

Parts List

• 1x KL-9002-100 Compressor cylinder
• 1x KL-9001-11 SP Spring retaining pair size 1 with protective inserts
• 1x KL-9001-12 SP Spring retaining pair size 2 with protective inserts
• 1x KL-4999-1322 Foam insert

Technical Data

• Clamping width (min.): 40 mm
• Clamping width (max.): 375 mm
• Drive connector hexagon [metric]: 24 mm
• Contents (Qty of pieces): 5
• Spring Ø, inner (min.): 85 mm
• Spring Ø, outer (max.): 170 mm
• Load (max.): 27.500 N
• Length, extended: 795 mm
• Total length: 478 mm
• Distance to work: 305 mm
• Total width: 394 mm
• Total height: 125 mm
• Storage: Foam insert
• Weight: 33.07 lb (15 kg)
• EAN/UPC: 4046459140566