ETP 100 Electronic torsion tester 4-100 Nm, 1/2"

• Maximum torque: 100 Nm
• Minimum torque: 4 Nm
• Square drive: 1/2" (12.5 mm)
• Adapter: 1/4", 3/8"
• Torque measurement accuracy: ± 1% tolerance of the reading, ± 1 digit

Technical Data

• Torque (min.): 4 Nm
• Torque (max.): 100 Nm
• Drive connector square: 1/2"
• Drive mount, square: 12.5 mm
• Power source: Cable
• Type of battery: CR 1225
• Total length: 245 mm
• Total width: 159 mm
• Total height: 148 mm
• Weight: 22.05 lb (10 kg)
• Nominal length: 245 mm
• Nominal width: 159 mm
• Nominal height: 148 mm
• Chemical properties: Lithium
• Bill of materials: L-BOXX 136/238, RS232 Verbindungskabel, RS232 auf USB-Adapterkabel, Netzteil, Auswertesoftware, Bedienungsanleitung, Prüfzertifikat
• Torque (min.): 3 lbf·ft
• Torque (max.): 74 lbf·ft
• Torque range (min./max.): 3 lbf·ft - 74 lbf·ft
• Torque range (min./max.): 4 Nm - 100 Nm
• Measurement accuracy: ± 1% tolerance for all readings ± 1 digit
• Mounting / Installation: 4x M8 – grade 8.8, with suitable washers and nuts
• Interface: RS-232
• Graphic display: Yes
• Resolution: 0.01
• Adaptor: 1/4" 3/8"
• Scope of delivery: L-BOXX 136/238, RS232 Verbindungskabel, RS232 auf USB-Adapterkabel, Netzteil, Auswertesoftware, Bedienungsanleitung, Prüfzertifikat
• EAN/UPC: 4002805932964