KL-9002-100 Compressor Cylinder

• In conjunction with the various spring retainer pairs, the KL-9002-100 tensioning cylinder allows springs from MacPherson suspension strut or wishbone axles to be removed and installed easily and safely, space permitting
• Spring retainers for spring diameters of 60 (inside) - 205 (outside) available
• Maximum load capacity 27 500 N (in case of the prescribed 4-fold safety, the maximum load capacity of the spring retainer is with 27 500 N!)
• Characteristics:
• Due to the grid system, the minimum spanner size (opening width) is adjustable to 40 mm and the maximum to 361 mm
• This is important when tensioning very short springs (2 - 3 spring coils) and in case of very long springs, in order to completely release or renew them
• The forged pressure plates are fixed with a bajonet lock system with automatic lock (tools, screws and screw rings are not needed)
• The spindle drive stays closed, when the locking pin shears off
• The compressed spring can then be released via an auxiliary drive, in order to install a new locking pin
• A spindle overload during the release process when the maximum operating stroke is reached, is prevented by an automatic free-wheel
• Important to avoid damage to the spring compressor
• Due to a large pressure plate assortment, the spring compressor can be used on nearly all MacPherson suspension strut axles, damper strut axles and in part on some wishbone axles
• Due to the interaction of high-precision individual components and the use of wear-resistant nitriding steel, the compressor cylinder works very smoothly and nearly without any wear
• For example, tensioning of a Mercedes M-Class spring with a block force of approx. 18 000 N, only requires a driving force of 35 Nm
• Advantages:
• Simple handling regardless of large forces
• Spring retainer attachment with automatic engagement
• Adjustment of spanner sizes
• Drive with additional auxiliary drive
• Automatic free-wheel of the spindle
• Can be also used for conical springs

Technical Data

• Clamping width (min.): 40 mm
• Clamping width (max.): 375 mm
• Drive connector hexagon [metric]: 24 mm
• Contents (Qty of pieces): 1
• Load (max.): 27.500 N
• Distance to work: 305 mm
• Weight: 15.43 lb (7 kg)
• EAN/UPC: 4046459056379