FLIR Ball Probe Moisture Meter Accessory
SKU: MR12
- Measurement Accuracy: Relative measurement
- Warranty: https://www.flir.com/testwarranty
FLIR MR12 Ball probe moisture sensor accessory
The MR12 is a moisture sensor accessory for FLIR moisture meters MR60, MR160 and MR176. The Ball tip design makes it easy to run over, and around objects on the measuring surface. This combined with the non-invasive measurement principle, allows you to cover a large target area in short time without leaving a mark. Use with the optional MR04 extension pole to reduce the need for a ladder, or to optimize ergonomics for ‘high’ and ‘low’ measuring targets. The MR12’s extended range reduces the risk of underestimating the remediation work scope by missing moisture problems not present at, or close to the measuring surface. With up to 100 mm (4 in) penetration depth, depending on material type, vs the 19 mm (¾ in.) for typical pin- less sensors on the market, the MR12 is the ‘must have’ sensor on jobs where deeply situated moisture problems pose a risk. Wide range of common building materials supported. Handgrip designed to avoid hand interfering with measurement. ‘set relative zero’ feature. Robust/ rugged/ Reliable
Specifications
- Part name: Ball probe moisture sensor accessory
- Measurement Range: 0% to 100%
- Measurement Accuracy: Relative measurement
- Measurement detection depth: Sensing depth up to 100 mm (4.0 in.) , depending on material under test.
- Measurement Principle: Capacitance ball sensor (non-invasive)
- Warranty: https://www.flir.com/testwarranty
- Calibration cycle: N/A
- Certifications: CE, RCM
- Power requirements: 9V battery (rear compartment)
- Battery life: 40 hours typical, W.O Worklight
- Battery status LED (On/Off button): LED fully ON: 50 ~ 100% LED flashes once/second: 20 ~49% LED flashes 3x/second: < 20 % LED flashes and turns off: 0%
- Auto Power Off (APO): After 5 minutes
- Drop test: 2 m (6.6 ft.)
- Ingress Protection Rating: IP40
- Operating Temperature: 0 to 50°C (32 to 122°F)
- Weight: 295 g (10.4 oz)
- Dimensions (H × W × L): Probe handle body (without sensor): 174 x 67 x 37 mm (6.85 x 2.63 x 1.45 in.) Sensor: 25 x 25 x 66 mm (0.98 x 0.98 x 2.59 in.)
- Cable length: 1.8 m (6 ft) uncoiled
- Material: Impact resistant plastic
- Color: Black
- Packaging type: Gift box with colored sleeve
- Packaging contents: MR12 Non- invasive Ball type moisture sensor accessory for FLIR Moisture meters 1 × 9V alkaline battery User manual Warranty card Line card
- Packaging weight: 0.36 kg (0.8 lb.)
- Packaging dimensions (H × W × L): 15.0 × 5.0 × 28.7 cm (5.9 ×2.0 × 11.3 in.)
- Carton weight: 11.8 kg (32.4 lb.)
- Carton dimensions (H × W ×L): 47 × 58 × 27 cm (18.5 × 22.8 × 10.6 in.)
- Carton quantity: 30
- EAN-13: 0793950371121
- UPC-12: 793950371121
- Country of origin: China
- Tariff code: 9027.80.4560
- Website: http://support.flir.com
Additional Information
| Brand | Flir |